1. ZECK - Stringing Machines & Equipment
  2. Accessories
  3. PRESSING TOOLS

PRESSING TOOLS

HYDRAULIC PRESS HEAD
  • Light and easy to handle crimping unit with flat face quick action couplings
  • Double acting cylinder with very short pressing cycle and highest reliability
  • Please specify when ordering:
    • Type of conductor
    • Hexagonal diameter of compression
    • Drawing of compression dead end clamps


Optional
  • Lockable transport box
  • Dies for aluminum crimping
  • Dies for steel crimping
 
Article no.77-7400CE (100 t)77-7500CE (200 t)
Compression force (kN)10002000
Operating pressure (bar)700700
Performance ratio (t/kg)3.02.1
Max. exterior Ø of compression (mm)7190
Max. stroke (mm)2433
Weight (kg)3398
Optional
Dies for aluminum crimping77-741077-7510
Dies for steel crimping77-742077-7520
Metal box for press head and dies77-7448Not available
HYDRAULIC POWER UNIT FOR PRESS HEAD
  • Highly reliable power unit with integrated valve and control unit
  • Two hydraulic flat face quick-action couplings to power double acting presses
  • Hot-dip galvanized steel frame


77-7730CE
  • Made in Germany
  • Increased stroking speed and working life (tested with > 35000 cycles)
  • Increased safety due to dead man’s switch
  • Shorter pressing cycle due to higher flow rate
  • NEW: Highest reliability due to 3 independent hydraulic filtration systems


Special designs on request		 
BrandZECKZECKSanwa TekkiEurope
Article no.77-7730CE77-7733CE (SPS)77-7700CE77-7750CE
Operating pressure (bar)700700700700
EngineGasoline engineGasoline engineGasoline engineElectric motor
Engine performance Max. 4.3 kW (5.8 hp)Max. 4.3 kW (5.8 hp)Max. 4.3 kW (5.8 hp)Max. 2.2 kW (50 Hz, 230 V)
Optional 400 V (77-7752CE)
Dimensions (mm)720 x 490 x 490720 x 490 x 490590 x 430 x 450560 x 470 x 620
Weight (kg)52726345
 Optional
Metal box for power unit77-7447Not available77-744777-7447
Tarp010-920   
 Optional
Tarp010-920 
Handle foldable77-7450 
77-7733CE
WITH ELECTRONIC CONTROL (PLC)
  • Recording system for compressions
  • If desired, an individual file for every connector can be created
  • Selection of aluminum compression or steel compression possible
  • Cable remote control with cable of 5 m

Special designs on request		 
HYDRAULIC HOSE KIT
  • Includes 2 maximum pressure hoses with flat face quick-action couplings
  • To connect the press head to the hydraulic power unit or a ZECK machine with an integrated hydraulic system for presses


Special designs on request		 
Article no.Length
(m)		Weight
(kg)
77-7431CE33.4
77-7432CE54.5
77-7433CE107.9
77-7434CE1510.8
77-7435CE2014.3
Optional
77-7445Box for hose kit for lengths up to 10.0 m
JOINT STIFFENER
  • To protect the mid-span joint against bending when passing over pulley blocks
  • Please specify when ordering:
    • Mid-span joint
    • Conductor Ø
    • Max. exterior Ø of pressed sleeve


Special designs on request		 
Article no.E Ø
(mm)		Groove diameter pulley block
(mm)		Max. CH Ø
(mm)		Breaking load at edges
(kN)*
77-04506068492 – 5
77-0452739559max. 6.5

*Varies according to total length

CONDUCTOR TRIMMER
  • Conductor trimmer with adjustable cutting wheel for trimming aluminum wires of aluminum/steel conductors (max. conductor Ø 38.3 mm)
  • Including case and holding fixture for bushing
  • Weight: 2.05 kg


Optional
  • Conductor trimmer for larger conductor Ø (Article no. 60-8155)
 
  
BUSHING FOR CONDUCTOR TRIMMER
  • Bushing for aluminum/steel conductors
  • Please specify when ordering:
    • Conductor Ø (max. 38.3 mm)
    • Type of conductor


Optional
  • Bushing for larger conductor Ø (Article no. 60-8165)


Special designs on request