1. ZECK - Stringing Machines & Equipment
  2. Overhead Transmission Lines
  3. PULLER-TENSIONER
  4. WB 1800/9 Z377

WB 1800/9 Z377

  • Completely electronically controlled puller-tensioner for up to 2 (optional 3) ropes with 2 bull wheels (Ø1800 mm), with a groove diameter of 45 mm (optional 60 mm) and a max. pulling and tensioning force of 90 kN

Technical Data

PERFORMANCE IN PULLING MODE

Max. pulling force90 kN
Max. speed5 km/h
Max. Speed with max. pulling force2.2 km/h

PERFORMANCE IN TENSIONING MODE

Max. tensioning force90 kN
Max. Speed with max. tensioning force5 km/h
Min. tensioning force ATS | SLTSapprox. 8 kN | approx. 2 kN

BULL WHEEL

Number2
Diameter1800 mm
Groove Ø45 mm
Optional60 mm
Number of conductorsup to 2

DIMENSIONS | WEIGHT

Length x Width x Heightapprox. 6 x 2.4 x 3.2 m
Weightapprox. 7300 kg

Features

  • 1-axle chassis with rigid axle for up to 30 km/h (construction site operation, without official approval for road service)
  • Lockable aluminum cover
  • Back support via robust hydraulic sprag
  • Front support via robust mechanical support winch
  • Automatic rope/conductor clamping with grounding device

ENGINE

  • Max. 103 kW (140 hp)
  • Liquid-cooled diesel engine with electronic rpm-control
  • 24-V system with high capacity battery

DRIVING SYSTEM

  • Each bull wheel with planetary gear and hydraulic motor as completely enclosed drive unit (highly efficient, minimal maintenance)
  • Each bull wheel with an automatically activated safety brake
  • Hydraulic system with quick-action screw couplings to individually control 2 drum stands

CONTROL SYSTEM

  • Control of rope direction and rope speed (infinitely) by joystick
  • ATS, Automatic Tensioning System
  • PLC control for optimized productivity and safety
  • Clearly arranged control panel with color display for supervision of pulling and tensioning force as well as hydraulic, drive, and electric system with an intelligent diagnosis and fault recognition system
  • ZECK Stringing Data Record System with USB port
  • Automatic hydraulic oil cooling system
  • Adjustable overload protection

OPTIONAL EQUIPMENT

  • Diesel engine in accordance with EU emissions directive
  • Precleaner for engine air filter
  • Lighting and mudguard (for rigid chassis)
  • 2-axle chassis with rigid axles and parking brake for up to 30 km/h (construction site operation, without official approval for road service)
  • 2-axle chassis with suspended axle, brake, lighting and mudguard for up to 80 km/h
  • Rope in device for max. 5° rope deflection
  • Bull wheels for left- and right-hand-lay conductors
  • Cable or radio remote control
  • Printer for ZECK Stringing Data Record System
  • Remote diagnosis via GSM network with GPS modem
  • Synchronisation system
  • Electronically controlled drum stand pretension
  • SLTS, Smart Low Tensioning System (machine can be used in stringing operations with low tensioning force, e.g. OPGW)
  • Hydraulic system for drum stand control with flat face quick-action couplings
  • Hydraulic system (700/1000 bar) to power pressing tool
  • Lockable toolbox
  • Holding fixture for hose kit
  • Grounding plate including fixture and grounding device (cable 3 m, 50 mm²)
  • Acoustic insulation
  • Arctic Kit with preheating system for up to -30 °C
  • Biodegradable hydraulic oil

Special designs on request

Accessories