- Completely electronically controlled tensioner for up to 4 cables with 2 bull wheels (Ø 1500 mm), with a groove diameter 45 mm (optional 60 mm) and a max. pulling and tensioning force of 140 kN
B 1500/14 Z337
Technical Data
PERFORMANCE IN TENSIONING MODE
| Max. tensioning force | 140 kN |
| Min. tensioning force | approx. 10 kN |
| Max. speed | 5 km/h |
PERFORMANCE IN PULLING MODE
| Max. pulling force | 140 kN |
| Speed at max. pulling force | 0.5 km/h |
| Max. speed | 2.2 km/h |
BULL WHEEL
| Number | 2 |
| Diameter | 1500 mm |
| Groove Ø | 45 mm |
| Optional | 60 mm |
| Number of conductors | up to 4 |
DIMENSIONS | WEIGHT
| Length x Width x Height | ~ 5.0 x 2.3 x 2.9 m |
| Weight | ~ 6300 kg |
Features
- 1-axle chassis with rigid axle and parking brake for up to 30 km/h (construction site operation without official approval for road service)
- Lockable aluminum cover (chequer plate)
- Back support via robust hydraulic sprag
- Automatic rope clamping with grounding device
ENGINE
- Max. 63 kW (85 hp)
- Liquid-cooled diesel engine with electronic rpm-control
- 24-V system with high capacity battery
Driving System
DRIVING SYSTEM
- Each bull wheel with planetary gear and hydraulic motor as completely enclosed drive unit (highly efficient, minimal maintenance)
- Each bull wheel with an automatically activated safety brake
- Hydraulic system with quick-action screw couplings to individually control 4 drum stands
CONTROL SYSTEM
- Control of rope direction and rope speed (infinitely) by joystick
- ATS, Automatic Tensioning System
- PLC control for optimized productivity and safety
- Clearly arranged control panel with color display for supervision of pulling and tensioning force as well as hydraulic, drive, and electric system with an intelligent diagnosis and fault recognition system
- ZECK Stringing Data Record System with USB port
- Automatic hydraulic oil cooling system
OPTIONAL EQUIPMENT
- Diesel engine in accordance with EU emissions directive
- Precleaner for engine air filter
- Brake, lighting and mudguard (for rigid chassis)
- 2-axle chassis with spring-mounted axles, brake, lighting and mudguard for up to 80 km/h
- Rope outlet
- Front support via robust hydraulic support
- Rope in device for max. 5° rope deflection
- Bull wheels for left- and right-hand-lay conductors
- Groove diameter 60 mm
- Cable or radio remote control
- Remote diagnosis via GSM network with GPS modem
- Synchronisation system
- Hydraulic system for drum stand control with flat face quick-action couplings
- Hydraulic system (700/1000 bar) to power the press head
- Lockable toolbox
- Holding fixture for hose kit
- Grounding plate with fixture including 3 m of copper cable, 50 mm²
- Acoustic insulation
- Arctic kit with preheating system for up to -30 °C
- Biodegradable hydraulic oil
- Aluminum cover, color as per RAL color table
Special designs on request