B 1500/4.5x4 Z328

  • Completely electronically controlled tensioner for up to 4 (1 + 1 + 1 + 1) cables with 8 (4 x 2) bull wheels (Ø 1500 mm), with a groove diameter 45 mm (optional 60 mm) and a max. pulling and tensioning force of 4 x 45 kN
  • Each bull wheel can be controlled individually

Technical Data


Max. tensioning force4 x 45 kN
Min. tensioning forceapprox. 3.5 kN
Max. speed5 km/h


Max. pulling force4 x 45 kN
Speed at max. pulling force0.7 km/h


Number8 (4 x 2)
Diameter1500 mm
Groove Ø45 mm
Optional60 mm
Number of conductorsup to 4 (1 + 1 + 1 + 1)


Length x Width x Height~ 6.2 x 2.5 x 2.8 m
Weight~ 10200 kg


  • 2-axle chassis with rigid axle and parking brake for up to 30 km/h (construction site operation without official approval for road service)
  • Lockable aluminum cover (chequer plate)
  • Back support via robust hydraulic sprag
  • Front support via robust hydraulic sprag
  • Automatic rope clamping with grounding device


  • Max. 75 kW (102 hp)
  • Liquid-cooled diesel engine with electronic rpm-control
  • 24-V system with high capacity battery

Driving System


  • Each bull wheel with planetary gear and hydraulic motor as completely enclosed drive unit (highly efficient, minimal maintenance)
  • Each bull wheel with an automatically activated safety brake
  • Hydraulic system with quick-action screw couplings to individually control 4 drum stands


  • Control of rope direction and rope speed (infinitely) by joystick
  • ATS, Automatic Tensioning System
  • PLC control for optimized productivity and safety
  • Clearly arranged control panel with color display for supervision of pulling and tensioning force as well as hydraulic, drive, and electric system with an intelligent diagnosis and fault recognition system
  • ZECK Stringing Data Record System with USB port
  • Automatic hydraulic oil cooling system


  • Diesel engine in accordance with EU emissions directive
  • Precleaner for engine air filter
  • Brake, lighting and mudguard (for rigid chassis)
  • 2-axle chassis with spring-mounted axles, brake, lighting and mudguard for up to 80 km/h
  • Front support via robust hydraulic support
  • Rope in device for max. 5° rope deflection
  • Bull wheels for left- and right-hand-lay conductors
  • Groove diameter 60 mm
  • Cable or radio remote control
  • Remote diagnosis via GSM network with GPS modem
  • Synchronisation system
  • Hydraulic system for drum stand control with flat face quick-action couplings
  • Hydraulic system (700/1000 bar) to power the press head
  • Holding fixture for hose kit
  • Grounding plate with fixture including 3 m of copper cable, 50 mm²
  • Acoustic insulation
  • Arctic kit with preheating system for up to -30 °C
  • Biodegradable hydraulic oil
  • Aluminum cover, color as per RAL color table

Special designs on request