ST 1100 D Z257
- Completely electronically controlled double drum winch with a max. pulling force of 68 kN or 133 kN and a max. speed of 80 m/min or 37 m/min
- Suitable for lifting loads for rapid and safe tower equipping, tower erection or final sagging
Technical Data
PERFORMANCE IN PULLING MODE
Upper winchMax. pulling force (inner rope layer) | 68 kN |
Max. speed (outer rope layer) | 80 m/min |
Lower winch
Max. pulling force (inner rope layer) | 133 kN |
Max. speed (outer rope layer) | 37 m/min |
DRUM CAPACITY
Upper winchK = 87500/(Ø x Ø); e.g. Ø 14 mm | approx. 450 m |
Lower winch
K = 11400/(Ø x Ø); e.g. Ø 21 mm | approx. 250 m |
DIMENSIONS | WEIGHT
Length x Width x Height | approx. 4.6 x 2.3 x 2.2 m |
Weight (without rope) | approx. 4400 kg |
Features
- 2-axle chassis with rigid axles and parking brake for up to 30 km/h (construction site operation, without official approval for road service)
- Lockable aluminum cover
- Back support via robust mechanical sprag
- Front support via robust mechanical support winch
- Automatic rope guiding device
- Large rope drum with sturdy pressure roller for rope fixation
ENGINE
- Max. 65 kW (88 hp)
- Liquid-cooled diesel engine with electronic rpm-control
- 24-V system with high capacity battery
DRIVING SYSTEM
- Rope drum with planetary gear and hydraulic motor as encapsulated drive unit (highly efficient, minimal maintenance)
- Each rope drum with an automatically activated safety brake
CONTROL SYSTEM
- Control of rope direction and rope speed (infinitely) by joystick
- Infinitely adjustable rope speed and exact control with max. load
- PLC control for optimized productivity and safety
- Clearly arranged control panel with color display for supervision of pulling force as well as hydraulic, drive, and electric system with an intelligent diagnosis and fault recognition system
- Automatic hydraulic oil cooling system
- Adjustable overload protection
OPTIONAL EQUIPMENT
- Diesel engine in accordance with EU emissions directive
- Brake, lighting and mudguard (for rigid chassis)
- 2-axle chassis with suspended axle, brake, lighting and mudguard for up to 80 km/h
- Cable or radio remote control
- Free wheel device to manually pull rope off the upper winch without engine
- Remote diagnosis via GSM network with GPS modem
- Slack rope safety system (only for steel rope)
- Lockable toolbox
- Spare wheel with lockable holding fixture
- Grounding plate
- Acoustic insulation
- Biodegradable hydraulic oil
- Rope of various types (steel)
Special designs on request
Accessories
Questions?
- Call us!
- +49 (0) 9542 9494-0
- info@zeck-gmbh.com