• RAIL TECHNOLOGIES

    RAIL TECHNOLOGIES

  • OVERHEAD TRANSMISSION LINES

    OVERHEAD TRANSMISSION LINES

  • UNDERGROUND CABLE

    UNDERGROUND CABLE

  • ROPEWAY

    ROPEWAY

WB 1500/15 Z387

  • Completely electronically controlled puller-tensioner for up to 4 ropes with 2 bull wheels (Ø 1500 mm ), with a groove diameter of 45 mm (optional 60 mm and a max. pulling and tensioning force of 150 kN

Technical Data

PERFORMANCE IN PULLING MODE

Max. pulling force150 kN
Max. speed4.8 km/h
Max. Speed with max. pulling force2 km/h

PERFORMANCE IN TENSIONING MODE

Max. tensioning force150 kN
Max. Speed with max. tensioning force5 km/h
Min. tensioning force ATS | SLTSapprox. 10 kN | approx. 2.5 kN

BULL WHEEL

Number2
Diameter1500 mm
Groove Ø45 mm
Optional60 mm
Number of conductorsup to 4

DIMENSIONS | WEIGHT

Length x Width x Heightapprox. 5 x 2.3 x 2.6 m
Weightapprox. 8200 kg

Features

EQUIPMENT

  • 2-axle chassis with rigid axles and brake for up to 30 km/h (construction site operation, without official approval for road service)
  • Lockable aluminum cover
  • Back support via robust hydraulic sprag
  • Front support via robust hydraulic support
  • Automatic rope/conductor clamping with grounding device

ENGINE

  • Max. 129 kW (175 hp)
  • Liquid-cooled diesel engine with electronic rpm-control
  • 24-V system with high capacity battery

DRIVING SYSTEM

  • Each bull wheel with planetary gear and hydraulic motor as completely enclosed drive unit (highly efficient, minimal maintenance)
  • Each bull wheel with an automatically activated safety brake
  • Hydraulic system with quick-action screw couplings to individually control 2 drum stands

CONTROL SYSTEM

  • Control of rope direction and rope speed (infinitely) by joystick
  • ATS, Automatic Tensioning System
  • PLC control for optimized productivity and safety
  • Clearly arranged control panel with color display for supervision of pulling and tensioning force as well as hydraulic, drive, and electric system with an intelligent diagnosis and fault recognition system
  • ZECK Stringing Data Record System with USB port
  • Automatic hydraulic oil cooling system
  • Adjustable overload protection

OPTIONAL EQUIPMENT

  • Precleaner for engine air filter
  • 2-axle chassis with rigid axles and brake for up to 30 km/h (construction site operation, without official approval for road service)
  • Brake, lighting and mudguard (for rigid chassis)
  • 2-axle chassis with suspended axle, brake, lighting and mudguard for up to 80 km/h
  • Rope in device for max. 5° rope deflection
  • Bull wheels for left- and right-hand-lay conductors
  • Type suitable for up to four conductors
  • Groove diameter 60 mm
  • Cable or radio remote control
  • Printer for ZECK Stringing Data Record System
  • Remote diagnosis via GSM network with GPS modem
  • Synchronisation system
  • Electronically controlled drum stand pretension
  • SLTS, Smart Low Tensioning System (machine can be used in stringing operations with low tensioning force, e.g. OPGW)
  • Hydraulic system for drum stand control with flat face quick-action couplings
  • Hydraulic system (700/1000 bar) to power pressing tool
  • Lockable toolbox
  • Holding fixture for hose kit
  • Grounding plate including fixture and grounding device (cable 3 m, 50 mm²)
  • Acoustic insulation
  • Arctic Kit with preheating system for up to -30 °C
  • Biodegradable hydraulic oil

Special designs on request

Accessories