RUNNING BOARD

ZECK HANDLE FOR COUNTER STRINGING OPERATION

Special designs on request

Article no.	L (mm)	B (mm)	H (mm)	Weight (kg)
76-2026	230	100	220	1.6

OPGW-COUNTER WEIGHT

Prevents twisting of the OPGW
We recommend using 2 counter weights to avoid that the OPGW twists when driving over the pulley block
Delivery includes clamp unit and counter weight (approx. length 3 m), to avoid twisting
Please specify when ordering:
- Rope Ø
- Groove Ø of pulley block

Special designs on request

Article no.	Number of counter weights	A (mm)	B (mm)	C (mm)	Rope Ø (mm)	Weight (kg)
77-0841	2	60	2930	38	10 – 17	7.5
77-0843	2	60	3060	38	17 – 23	7.8

RUNNING BOARD (BALANCING)

To connect a 2-, 3-, or 4-bundle to the pulling rope
Balancing wheels and weights for stabilization during the stringing operation
Delivery includes swivel joints and steel rope with spliced eyes
A connector with a working load of 120 kN and a breaking load of 360 kN is used for all running boards

OPTIONAL

Reinforced design with a working load of 160 kN and a breaking load of 480 kN possible

Special designs on request

Article no.	Number of ropes	A (mm)	B (mm)	C (mm)	D (mm)	Joint 76-0405	Joint 76-0406	Working load (kN)	Breaking load (kN)	Rope length (m)*	Weight (kg)
77-0800	2	146	161	350	-	2	1	93	280	1 x 30	174
77-0802	2	174	161	406	-	2	1	93	280	1 x 30	186
77-0804	3	146	161	350	-	3	1	93	280	1 x 30 + 1 x 15	208
77-0806	3	174	161	406	-	3	1	93	280	1 x 30 + 1 x 15	220
77-0820	4	100	160	540	292	4	1	120	360	2 x 30	276
77-0822	4	145	160	650	356	4	1	120	360	2 x 30	296
77-0824	4	146	160	640	292	4	1	120	360	2 x 30	296
77-0826	4	178	160	760	356	4	1	120	360	2 x 30	316

*For a rope Ø of 16 mm or 18 mm | Working load: Calculated with safety factor 3.0

Running board with breaking load of 480 kN, may only be used with pulley blocks with groove width 95 mm

Article no.	Number of ropes	A (mm)	B (mm)	C (mm)	D (mm)	Joint 76-0405	Joint 77-0408	Working load (kN)	Breaking load (kN)	Rope length (m)*	Weight (kg)
77-0806-15	3	174	161	540	-	3	1	160	480	1 x 30 + 1 x 15	233

2 and 3 bundle
4 bundle, designed for two individual machines working in synchro mode or machines with two bull wheel units.
4 bundle, designed for machines with one bull wheel unit

RUNNING BOARD (FIXED)

Special designs on request

Article no.	Number of ropes	A (mm)	B (mm)	C (mm)	D (mm)	Joint 76-0405	Joint 76-0406	Rope length (m)*	Working load (kN)	Breaking load (kN)	Weight (kg)
77-0853	2	146	170	335	-	2	1	2 x 3.5	93	280	98
77-0854	2	174	170	390	-	2	1	2 x 3.5	93	280	100
77-0855	3	146	170	335	-	3	1	3 x 3.5	93	280	105
77-0850	3	174	170	390	-	3	1	3 x 3.5	93	280	108
77-0856	4	100	170	535	292	4	1	4 x 3.5	120	360	122
77-0857	4	145	170	643	356	4	1	4 x 3.5	120	360	130
77-0858	4	146	170	635	292	4	1	4 x 3.5	120	360	130
77-0851	4	178	170	755	356	4	1	4 x 3.5	120	360	137

*For a rope Ø of 16 mm or 18 mm | Working load: Calculated with safety factor 3.0