• RAIL TECHNOLOGIES

    RAIL TECHNOLOGIES

  • OVERHEAD TRANSMISSION LINES

    OVERHEAD TRANSMISSION LINES

  • UNDERGROUND CABLE

    UNDERGROUND CABLE

  • ROPEWAY

    ROPEWAY

PRESSING TOOLS

HYDRAULIC PRESS HEAD
  • Light and easy to handle crimping unit with flat face quick action couplings
  • Double acting cylinder with very short pressing cycle and highest reliability
  • Please specify when ordering:
    • Type of conductor
    • Hexagonal diameter of compression
    • Drawing of compression dead end clamps
Optional
  • Lockable transport box
  • Dies for aluminum crimping
  • Dies for steel crimping
Article no.77-7400CE (100 t)77-7500CE (200 t)
Compression force (kN)10002000
Operating pressure (bar)700700
Performance ratio (t/kg)3.02.1
Max. exterior Ø of compression (mm)7690
Max. stroke (mm)2433
Weight (kg)3398
Optional
Dies for aluminum crimping77-741077-7510
Dies for steel crimping77-742077-7520
Metal box for press head and dies77-7448Not available
HYDRAULIC POWER UNIT FOR PRESS HEAD
  • Highly reliable power unit with integrated valve and control unit
  • Two hydraulic flat face quick-action couplings to power double acting presses
  • Hot-dip galvanized steel frame
77-7730CE
  • Made in Germany
  • Increased stroking speed and working life (tested with > 35000 cycles)
  • Increased safety due to dead man’s switch
  • Shorter pressing cycle due to higher flow rate
  • NEW: Highest reliability due to 3 independent hydraulic filtration systems
Special designs on request
BrandZECKZECKSanwa TekkiEurope
Article no.77-7730CE77-7733CE (SPS)77-7700CE77-7750CE
Operating pressure (bar)700700700700
EngineGasoline engineGasoline engineGasoline engineElectric motor
Engine performance Max. 4.3 kW (5.8 hp)Max. 4.3 kW (5.8 hp)Max. 4.3 kW (5.8 hp)Max. 2.2 kW (50 Hz, 230 V)Optional 400 V (77-7752CE)
Dimensions (mm)720 x 490 x 490720 x 490 x 490590 x 430 x 450560 x 470 x 620
Weight (kg)52726345
Optional
Metal box for power unit77-7447Not available77-744777-7447
Tarp77-7449
Optional
Tarp77-7449
Handle foldable77-7450
77-7733CEWITH ELECTRONIC CONTROL (PLC)
  • Recording system for compressions
  • If desired, an individual file for every connector can be created
  • Selection of aluminum compression or steel compression possible
  • Cable remote control with cable of 5 m
Special designs on request
HYDRAULIC HOSE KIT
  • Includes 2 maximum pressure hoses with flat face quick-action couplings
  • To connect the press head to the hydraulic power unit or a ZECK machine with an integrated hydraulic system for presses
Special designs on request
Article no. Length

(m)
Weight

(kg)
77-7431CE 3 3.4
77-7432CE 5 4.5
77-7433CE 10 7.9
77-7434CE 15 10.8
77-7435CE 20 14.3
Optional
77-7445 Box for hose kit for lengths up to 10.0 m
JOINT STIFFENER
  • To protect the mid-span joint against bending when passing over pulley blocks
  • Please specify when ordering:
    • Mid-span joint
    • Conductor Ø
    • Max. exterior Ø of pressed sleeve
Special designs on request
Article no. E Ø

(mm)
Groove diameter pulley block

(mm)
Max. CH Ø

(mm)
Breaking load at edges

(kN)*
77-0450 60 68 49 2 – 5
77-0452 73 95 59 max. 6.5
*Varies according to total length
CONDUCTOR TRIMMER
  • Conductor trimmer with adjustable cutting wheel for trimming aluminum wires of aluminum/steel conductors (max. conductor Ø 38.3 mm)
  • Including case and holding fixture for bushing
  • Weight: 2.05 kg
Optional
  • Conductor trimmer for larger conductor Ø (Article no. 60-8155)
BUSHING FOR CONDUCTOR TRIMMER
  • Bushing for aluminum/steel conductors
  • Please specify when ordering:
    • Conductor Ø (max. 38.3 mm)
    • Type of conductor
Optional
  • Bushing for larger conductor Ø (Article no. 60-8165)
Special designs on request