ST 500 D Z272
KEY FACTS
Completely electronically controlled double drum winch with a max. pulling force of 63 kN each winch and a max. speed of 78 m/min
Suitable for lifting loads for rapid and safe tower equipping, tower erection or final sagging
Upper winch can be limited according to customer requirements (e.g. to 2.5 t for gin pole lifting)
Dane Techniczne
PERFORMANCE IN PULLING MODE
Upper and lower winch
Max. pulling force (inner rope layer) | 63 kN |
Max. speed (outer rope layer) | 78 m/min |
DRUM CAPACITY
Upper and lower winch
K = 87500/(Ø x Ø); e.g. Ø 14 mm | approx. 450 m |
DIMENSIONS | WEIGHT
Length x Width x Height | approx. 4.3 x 2.3 x 2.2 m |
Weight (without rope) | approx. 3500 kg |
Cechy
ENGINE
Max. 55.4 kW (75.3 hp)
Liquid-cooled diesel engine with electronic rpm-control
24-V system with high capacity battery
DRIVING SYSTEM
Rope drum with planetary gear and hydraulic motor as encapsulated drive unit (highly efficient, minimal maintenance)
Each rope drum with an automatically activated safety brake
CONTROL SYSTEM
Control of rope direction and rope speed (infinitely) by joystick
Infinitely adjustable rope speed and exact control with max. load
PLC control for optimized productivity and safety
Clearly arranged control panel with color display for supervision of pulling force as well as hydraulic, drive, and electric system with an intelligent diagnosis and fault recognition system
Automatic hydraulic oil cooling system
Adjustable overload protection
EQUIPMENT
2-axle chassis with rigid axle and parking brake for up to 30 km/h (construction site operation without official approval for road service)
Lockable aluminum cover (chequer plate)
Back support via robust hydraulic sprag
Front support via robust hydraulic support
Automatic rope guiding device
Large rope drum with sturdy pressure roller for rope fixation
OPTIONAL EQUIPMENT
Diesel engine in accordance with EU emissions directive
Brake, lighting and mudguard (for rigid chassis)
2-axle chassis with spring-mounted axles, brake, lighting and mudguard for up to 80 km/h (with official approval and homologation for road service)
Drawbar adjustable in height with changeable towing device for car or truck
Cable or radio remote control
Free wheel device to manually pull out rope without engine
Slack rope safety system (only for steel rope)
Lockable toolbox
Underbody shield
Spare wheel with holding fixture
Grounding plate with fixture including 3 m of copper cable, 50 mm²
Acoustic insulation
Biodegradable hydraulic oil
Rope of various types (steel)
Aluminum cover, color as per RAL color table
Both winches can be used simultaneously (ST 500x2 Z262)
Special designs on request
Questions?
- Call us!
- +49 (0) 9542 9494-0
- info@zeck-gmbh.com