WB 1500/16+8
KEY FACTS
Completely electronically controlled puller-tensioner for up to 4 (2 + 2) cable (optional 6 (3 + 3)) with 4 (2 x 2) bull wheels (Ø 1500 mm), with a groove diameter 60 mm and a max. pulling and tensioning force of 2 x 80 kN or 1 x 160 kN
Each bull wheel can be controlled individually
Technical Data
PERFORMANCE IN PULLING MODE
Max. pulling force | 2 x 80 kN or 1 x 160 kN |
Max. speed | 4.8 km/h |
Max. Speed with max. pulling force | 2.4 km/h |
PERFORMANCE IN TENSIONING MODE
Max. tensioning force | 2 x 80 kN or 1 x 160 kN |
Max. speed | 5 km/h |
Min. tensioning force ATS | SLTS | approx. 7 kN (80 kN) |
BULL WHEEL
Number | 4 (2 x 2) |
Diameter | 1500 mm |
Groove Ø | 60 mm |
Number of conductors | up to 4 |
Optional | 6 (3 + 3) |
DIMENSIONS | WEIGHT
Length x Width x Height | approx. 6.5 x 2.4 x 3 m |
Weight | approx. 10600 kg |
Features
ENGINE
Max. 200 kW (272 hp)
Liquid-cooled diesel engine with electronic rpm-control
24-V system with high capacity battery
DRIVING SYSTEM
Each bull wheel with planetary gear and hydraulic motor as completely enclosed drive unit (highly efficient, minimal maintenance)
Each bull wheel with an automatically activated safety brake
Hydraulic system with quick-action screw couplings to individually control 4 drum stands
CONTROL SYSTEM
Control of rope direction and rope speed (infinitely) by joystick
ATS, Automatic Tensioning System
PLC control for optimized productivity and safety
Clearly arranged control panel with color display for supervision of pulling and tensioning force as well as hydraulic, drive, and electric system with an intelligent diagnosis and fault recognition system
ZECK Stringing Data Record System with USB port
Automatic hydraulic oil cooling system
Adjustable overload protection
EQUIPMENT
2-axle chassis with rigid axles and brake for up to 30 km/h (construction site operation without official approval for road service)
Lockable aluminum cover (chequer plate)
Back support via robust hydraulic support legs
Front support via robust hydraulic support
Automatic rope/conductor clamping with grounding device
OPTIONAL EQUIPMENT
Diesel engine in accordance with EU emissions directive
Precleaner for engine air filter
Automatic rope clamping system
Lighting and mudguard (for rigid chassis)
2-axle chassis with spring-mounted axles, brake, lighting and mudguard for up to 80 km/h (with official approval and homologation for road service)
Rope in device for max. 5° rope deflection
Capstans for left and right-hand-lay conductors
Type suitable for up to six conductors
Cable or radio remote control
Printer for ZECK Stringing Data Record System
Remote diagnosis system via GSM network with GPS modem
Synchronization system for connecting several machines to one another
Electronically controlled drum stand pretension
SLTS, Smart Low Tensioning System (machine can be used in stringing operations with low tensioning force, e.g. OPGW or pilot rope)
Hydraulic system for drum stand control with flat face quick-action couplings
Hydraulic system (700/1000 bar) to power the press head
Lockable toolbox
Holding fixture for hose kit
Grounding plate with fixture including 3 m of copper cable, 50 mm²
Acoustic insulation
Arctic kit with preheating system for up to -30 °C
Biodegradable hydraulic oil
Aluminum cover, color as per RAL color table
Special designs on request
Questions?
- Call us!
- +49 (0) 9542 9494-0
- info@zeck-gmbh.com