HB 800 Z193
KEY FACTS
Flexible puller for dismounting conductors with a max. pulling force of 14 kN and a max. speed of 50 m/min
Machine is constructed especially for a fast disposal of conductors
Technical Data
PERFORMANCE IN PULLING MODE
Max. drive torque | 3200 Nm |
Max. pulling force (inner rope layer) | 14 kN (Ø 460 mm) |
Max. pulling force (middle rope layer) | 8 kN (Ø 840 mm) |
Max. pulling force (outer rope layer) | 5.4 kN (Ø 1200 mm) |
Max. speed (inner rope layer) | 37 m/min |
Max. speed (middle rope layer) | 70 m/min |
Max. speed (outer rope layer) | 50 m/min |
DRUM CAPACITY
K = 523765/(Ø x Ø); e.g. Ø 16 mm | approx. 2045 m |
DIMENSIONS | WEIGHT
Length x Width x Height | approx. 1.7 x 1.2 x 1.7 m |
Weight (without rope) | approx. 890 kg |
Features
ENGINE
Max. 16.5 kW (22.1 hp)
Gasoline engine with recoil start
DRIVING SYSTEM
Rope drum with planetary gear and hydraulic motor as encapsulated drive unit (highly efficient, minimal maintenance)
Integrated hydraulic drive (drive unit does not have to be dismounted for a rope drum change)
CONTROL SYSTEM
Rope direction controlled by operating lever
Infinitely adjustable rope speed and exact control with max. load
Operating elements for pulling force and all machine functions
EQUIPMENT
Robust steel frame with anchoring eye bolts
Detachable reel with cone shaped core
OPTIONAL EQUIPMENT
Diesel engine in accordance with EU emissions directive
1-axle chassis with rigid axle for up to 30 km/h (construction site operation, without official approval for road service)
Non-detachable reel
Reel with higher rope capacity
Cable remote control
Free wheel device to manually pull out rope without engine
Lockable toolbox
Biodegradable hydraulic oil
Special designs on request
Questions?
- Call us!
- +49 (0) 9542 9494-0
- info@zeck-gmbh.com